229-33451 Belt guard assembly for Juki DDL-8700 lockstitch sewing machine.
S14420220C BOBBIN WINDER 65mm WHEEL (SMALL) BROTHER B737, S1000A GENERIC
Reference: S14420220C
S14420220C=SB1612001 Bobbin Winder to fit BROTHER flat bed machines - Has a smaller 62mm diameter drive wheel to fit under the Brother type Belt Guards. Fixes to the sewing table & runs off the machine drive belt (V-Belt).
S14420220C=SB1612001 Bobbin Winder to fit BROTHER flat bed machines - Has a smaller 62mm diameter drive wheel to fit under the Brother type Belt Guards. Fixes to the sewing table & runs off the machine drive belt (V-Belt).
S14420220C
S14420220C=SB1612001 Bobbin Winder to fit BROTHER flat bed machines - Has a smaller 62mm diameter drive wheel to fit under the Brother type Belt Guards. Fixes to the sewing table & runs off the machine drive belt (V-Belt).
in the same category
16 other products in the same category:
B1524-412-0B0 Needle feed presser foot with needle guard for universal flat machines
40264 Universal steel spool will fit most types of machines made in Taiwan by Donwei.
229-06309 Needle bar thread guide for Juki DDL-8700, DDL-5550N-7 machine.
D2406-555-DOH Generic Juki fixed trimming knife for Juki DDL-5550-4, DDL-5550-6 & DDL-555-5, DDL-8700-7 machines. Use with moveable knife 11040052C.
22907802 Juki Foot lifting lever DDL-8700, DDL-5550N-7machines. For screw use B1521555000.
110-40409 MOVING KNIFE HINGE SCREW JUKI GENUINE
229-20904 tension release pin Juki DDL lockstitch machines.
229-06101 Needle bar bush upper for Juki DDL-8700 lockstitch machine.
110-35003 Needle bar for Juki DDL-5550N-7 machine. Juki have replaced with part number 22939508.
SS-6060210-SP screws for fixing slide plate presser spring.
229-06200 Lower needle bar bush for Juki DDL-8700 lockstitch machine
400-12129 Back cover gasket for Juki DDL-8700 lockstitch machine.