229-20508 - 11018504 THREAD GUIDE 4 DDL8700 GENUINE
Referencia: 22920508
229-20508 4 DDL-8700 arm thread guide A
229-20508 4 DDL-8700 arm thread guide A
22920508
229-20508 4 DDL-8700 arm thread guide A
in the same category
16 otros productos de la misma categoría:
B0-DBM(1)N=18034=B9117201000=117061001 Large capacity spool with holes. Diameter 25.8mm width 11.0mm. Made in Japan by Towa.
229-58300=B1114012000 Thread guide pin 4 LU-562, LU-563 machines.
R0098240100=R0108240100 oil sump drainage screw gasket for 4 DDL-8700, 8100 lockstitch machines.
229-12000 Feed regulating pin for 4 DDL-8700 lockstitch sewing machine.
R351NF Needle feed roller presser foot for needle feed lockstitch machines.
22947808=11313103 thread guide for knife for 4 DDL-8700B-7, DDL900A, DLN5410N7 machines.
229-23205 Oil pump body cover for 4 DDL-8700 lockstitch sewing machine
229-08552 hand lifter cam assy for 4 DDL lockstitch machines.
S14420220C=SB1612001 Bobbin Winder to fit 1 flat bed machines - Has a smaller 62mm diameter drive wheel to fit under the 1 type Belt Guards. Fixes to the sewing table & runs off the machine drive belt (V-Belt).
SS-6700710-SH Oil sump drainage screw for 4 DDL-8700 lockstitch sewing machine
B04004 Steel spool with holes all around this is a universal fitting and will fit most types of standard flat machines. Diameter 21.2mm width 9.2mm. Seki brand made in Japan.
SS-6060210-SP screws for fixing slide plate presser spring.